Made in the USA
Custom Silver Soldered Cables

Made from the Finest USA made Copper Cable & Terminal Lugs
High Strand Count 2 & 4 Gauge Welding Cable
 400 & 600 strand count
Water and Acid Resistant Neoprene Jacketed

All connections are silver soldered & sealed against outside corrosion.





I started making these for my builds.
A few people wanted them, then a few more.
So here they are 2 & 4 gauge.
4 gauge is good for everything 500 amps and less.
Recently some manufactures recommended 2 gauge for 500 amp and up controllers.....
We used to run everything on #4
Some carts with 600a controllers are still out there doing fine on 4g
You have to look at the total package when considering cable size.
Higher voltage systems actually draw lower amps.... Most carts can use 4g cable on a 48v system.
Custom motors will draw more amperage & require bigger cable.


We have heard a lot of discussion over the years about Crimp vs Solder.
There is no better connection than a high quality solid silver soldered bond.
This bond needs to be protected from the corrosive battery bay environment.
Battery Gasses vented during recharging corrodes the cable ends and connections.

My solid soldered connections are sealed from exposure

Apply corrosion inhibitor to all battery terminal connections
I use Deka #00320





If you are upgrading or just trying to get the most out of your stock cart, you need fresh BIG cables.
The best part about installing these cable kits is I label each cable and send a diagram showing exactly where each numbered cable goes....
The install is Simple and FUN

A complete set replaces all of the heavy battery type cables in the cart. This includes cables for all of the batteries, controller, solenoid, forward & reverse switch, & motor complete!
Ezgo & Club Car Series cart owners will benefit greatly from this kit.
Complete the delivery system upgrade upgrade with my Heavy Duty Switch Cam or a Complete HD F&R Switch.

These are the BEST cables on the market today!



Get fresh cables for that winter upgrade now.




 

Ezgo Series Carts with aftermarket controller
(Alltrax, GE, FSIP) with a 36 volt Battery Pack 
13 cables total.... 8 cables for the motor, controller, solenoid, & F&R switch & 5 cables for the batteries.
Works with Alltrax, FSIP, GE, Curtis, any 3 blade series control. Most commonly used set.  

(13pcs) 4 gauge Premium Cable Set
Regularly $239    Now on SALE  $219
Ezgo 13pc 4g 
(13pcs) 2 gauge Premium Cable Set Regularly $269   Now on SALE  $249
Ezgo 13 pc 2g

Cable ordering notes:

These sets are just a sample of what is offered. I make custom sets for any project. Extra batteries, Stretched cart = no problem, just call.
Call to order CUSTOM lengths.
  Call if you will use the Big brown 400a solenoid with 3/8ths studs! 
If you are in doubt about which set is right for your cart email cartsunlimited@hughes.net or call 951-461-9626


 
 13pc 4g set for 48v Ezgo with six 8 volt batteries
Sale priced $219 Ezgo 4g 8v
13pc 2g set for 48v Ezgo with six 8 volt batteries
Sale priced $249 Ezgo 2g 8v


14 piece 4 gauge Ezgo Stock Cable set everyday price $239
  (these cable lengths are longer than above kits)
This set also works with the 4 blade Curtis or Alltrax controller with plug braking or A2 terminal like stock controller
  14 piece set for all stock Series Ezgo controller with 4 blade Stock Controller



Club Car Series
13 piece sets. For all stock & aftermarket series controllers with 3 large blades. (terminal connections)
4 gauge Premium Cable Set $219   Now on SALE $219
2gauge Premium Cable Set $265  Now on SALE $239



Ezgo PDS & DCS   Sepex carts with run/tow switch on the controller cover.
(8 pcs) 
4 gauge $159  Now on Sale $139 
8 pcs)  2gauge $179 Now on Sale $159

Ezgo PDS & DCS Complete 10pc set
Complete 4 gauge  $189  Now on Sale $169
Complete 2 gauge  $219 Now on Sale $199

New! Club Car IQ & PD-Plus
4 gauge set with OBC stud kit $229

2 gauge set with OBC stud kit $249


Precedent Cable sets with 4/12v batteries
4 gauge set with OBC stud kit $219

2 gauge set with OBC stud kit $239

Call to order & get the OBC stud kit included at no additional cost.
(limited time offer)





My Cables have been tested to NASA specifications.
Tests show they provide the highest conductivity with the least amount of resistance.
Just Call 951-461-9626 to order cables & conversion kits. Bundle products and SAVE $




Custom cables by the foot and by the job.... 2 pcs sets for adding Batteries in the bagwell for any 48 volt conversion.... Ezgo, Club Car, Yamaha
Special or Custom Cale needs? ....  just email cartsunlimited@hughes.net to discuss your project.
Recent posting from buggiesgonewild.com below ....

Cables are easy to install with clear markings and diagrams
Heavy Duty Ultra Conductive Switch Cams for Ezgo Series Forward & Reverse Switches (F&R)
Now available in a new Ultra Cool Buss Bar design ($69)
 
Better upgrade yet =  Complete NEW Heavy Duty Switch with HD Cam installed
(available for $168)

The HD F&R Switch Cam is a ten minute job with no cables or wires to disconnect!
Clear Pictures & Simple directions explain how to install in 1970 & newer Ezgo


Find more pictures of the Ez555 HD Switch Cam on the home page & save $15 by adding it to any controller package !
We are still under construction Please contact me at    scottyb@cartsunlimited.net    for prices and order information. Thank you.