Golf Cart Parts and
Golf Cart Accessories
golf Carts Unlimited
I would recommend working with Scotty at Carts Unlimited for this type of conversion. I have cc’d him on this email so that you will have his email address. He is the industry expert when it comes to these conversions!
Thank you for your inquiry,
Jason’s Golf Carts
V2 Conversion kit reviews
V2 kits were released in mid- May 2017
This is a fly by wire speed control system featuring the new Alltrax SR cotnrol
Admiral Motor A1
There is so much torque with this combo...even during motor break in I'm climbing hills at 19 mph that I was climbing at 12 or 13 before.
Club Car 48v cart. On the stock 275amp controller and 3.75hp motor it would top out around 15-16 mph on true flats - now it gets to around 21-22. top speed on downhill before was 22.5, today 27.5 almost 28. no less than 18mph going up hills today - before it would be 12. I really don't want to lose uphill speed but 25mph would be nice, to help keep up with traffic - this is my "daily driver"!
Conversion kit reviews :
2017 V2 kit reviews below
re Club Car Conversion kit C54
Good evening! I received everything today. All I have to say is WOW!
Thank you for such a rapid delivery and response to emails and all the questions. The kit appears to be of the best quality component around.
I glanced over the instructions briefly and it appears pretty easy and straight forward.
I'll be purchasing an extreme modification kit for my father in law in the near future. Brett D 8/25/17
03-2017 CC Conversion
I work at a shop that specializes in customizing golf carts. We build tons of custom carts and we are THE PLACE in town to bring your cart. A customer brings me a custom Rolls Royce cart (royal ride) and they wanted to upgrade from the old 5 solenoid and resistor coil speed setup to solid state and he wanted to convert to 48 volts at the same time. I knew I wanted something proven I knew would work. I emailed Scotty & I received a recommendation. The kit arrived very quickly and I was amazed at how easy the install was with Scotty’s instruction and illustrations
I had stripped all the old batteries, old battery cables, old hardware, and the old original wiring out of the cart. Then I power washed the frame , repainted it and installed the new conversion kit and all new battery and battery cables all in under 4 hours. This kit looks great and works even better then i could of imagined.
Now my customer is extremely happy that his cart is running better than ever and I’m sure it will for years to come.
Thank you , Casey
XCT INSTALL review 2017
Hey Scotty, just wanted to let you know that I installed the new controller last night. The schematics from Alltrax and your instructions made for an easy install. The cart seems to have responded well to the upgrades. Gonna start working towards the 42 volt upgrade now. It was an absolute pleasure dealing with you and your company. Shipping was super-fast and your recommendations were spot on. Nice to do business with a company that is knowledgeable and values its customers. Thanks again for all of your help. L. Abbott
Ausco hub review 7/17
I thought I'd take the time to commend you for your prompt attention to my recent order. My EZGO cart stripped a brake hub out over the holiday and I foolishly ordered a replacement from Amazon, and waited three days for it to arrive, only to discover that the seller who fulfilled my order was shipping cheap Chinese knock offs instead of the OEM hubs they showed in the listing. So, after requesting a return from Amazon and chastising them for allowing their sellers to ship junk in place of OEM parts, I went out on the web looking for a true OEM replacement.
I saw a post on a message board about the improved hubs and did a search to see where I could get them, and that's when I discovered your web site. Never having done business with you before and having had plenty of bad experience with other internet-based sales companies, I wasn't expecting real prompt service, but I figured the better hubs were worth the wait and went ahead and placed the order last Friday. I put the cheap hub that Amazon sent me on the cart so I could use it, figuring it would be at least a week before your shipment arrived. Imagine my surprise when my package arrived TODAY!!
Two business days from California? That's fast, and I was VERY impressed with the quality of the hubs and drums. I have little doubt that they will outlast the cart, even if I do the upgrade that I've been kicking around. I also see that you have everything I could ever need in the way of upgrades and some nice chargers too, so I'm sure this won't be the last time we do business.
Reading comments and reviews from other customers has become a big part of internet shopping. Rest assured I'll be putting a good word in for you if anyone asks me where to get good cart parts quickly.
Anyway, thanks again for the prompt service
I just did the same thing (installed a carts unlimited solid state conversion kit) with my 1993 Club Car. Although, my batteries were new and I just added 2 more 6 volts for a total of 48 volts. I added an alltrax 48500 controller kit from Scottyb. The kit came with everything I needed and the instructions were very easy to follow. I had it all in and running in 3 hours. I made my own 2 gauge cables as well. My speed went from 11 or 12mph to 18 with tons of torque with the stock motor. LOVE IT. New charger and fn1 switch for the controller are on their way...again...from Scottyb.
Noodlenugs, BGW Forum
Scotty, got the new cables and finished my XCT400 install. Very nice upgrade. So I just went ahead and bought the A4 motor you recommended. Send me the new map and instructions for it when you ship it. Thanks. You are running a great business here because you stay involved. Rich
I am interested in a 36v to 48v conversion kit...I have a 1984 club car ...
Thank you for your tech help...much appreciated! It's a night and day difference compared to the mess I had before. It runs nice and smooth now...just like a new one!
I have a '85 resistor cart, or used to have I should say. Just finished installing the conversion kit offered by ScottyB.
I am new to tinkering with carts but that was an easy conversion. Great set of directions and wiring schematics.
If you are considering doing this to your cart I would say go for it. Happy customer here, THANKS Scottyb. 03/25/12
The conversion is done everything is working excellent. It was an easy install with your help, the instruction and diagrams were perfect. Thank you for taking the time to compile complete instruction, diagrams, and taking the time on the phone to get me the kit that would best fit my needs. I Charged the batteries last night (38.3 Volt this morning) went for a little run this morning 19 MPH. I will tell everyone you are the go to guy. Thank You for your help.
INSTALLED YOUR KIT YESTERDAY AND ALL I CAN SAY IS HOLY COW WOW!!!! THIS THING IS AWESOME NOW! MY WIFE WANTS ME TO PUT SEAT BELTS IN IT NOW BECAUSE IT SCARED HER! LOL!!
THANK YOU FOR SUCH AN AWESOME PRODUCT THAT WAS A BREEZE TO INSTALL.
THANK YOU , HEATH P. 6/01/15
Thank you so much Scotty. You and Alltrax have went above and beyond. It is not every day that I deal with people that have such a high standard for customer satisfaction. I could not ask for more from a business. Also I have ordered your cables.
So I was finally able to take all the info you provided and combine that with the time needed to complete the install of the SR400/200 combo and the SW182 reversing contactor. Thanks to your help, the install went well
The C54 kit with 2 gauge wire gave me the torque I needed to be confident with weight load and mild hilly terrain. It works great Thanks.
Thanks a ton for your email help.
I find it extremely easy to deal with Carts Unlimited.
Many thanks for the great conversion kit. Schematics were simple and easy to follow. Cart is up and running with no problems whatsoever.
Hey Scotty, just wanted to let you know that I installed the new controller last night. The schematics from Alltrax and your instructions made for an easy install. The cart seems to have responded well to the upgrades. Gonna start working towards the 42 volt upgrade now. It was an absolute pleasure dealing with you and your company. Shipping was super-fast and your recommendations were spot on. Nice to do business with a company that is knowledgeable and values its customers. Thanks again for all of your help.
L. Abbott 02/05/2017